Index of X-Search Results

#!/usr/bin/perl $| = 1; # X-Search.pl # $Id: X-Search.PL,v 1.06 2000/06/14 18:22:57 jims Exp $ # (c) Copyright 2000 by Jim Smyser All Rights Reserved ## DEFINE USER SETTINGS # see USER SETTINGS in POD Doc's at end of script or man page for details $verbose = "1"; # print messages to screen 1=yes print messages 0=No $ck_url = "0"; # verify if urls are good or not $iDIR = "c:/server/root/xsearch"; # full path/name of dir to store index.html & write qid's under. $index_url = ""; # (optional) print index.html url address in admin mode $print_summaries = "1"; # 1= print summaries 0= no summaries $oURLS = "urls.dat"; # our seen urls file $qconfig = "query.ini"; # default configuration file name & location $port = ""; $host = ""; $sTEMP = "TEMP"; ## END USER SETTINGS ######################################################################### # Use the configuration file specified from a command line # argument if defined by the user if (defined($ARGV[0])) { $qconfig = $ARGV[0]; } $VERSION = '1.06'; use WWW::Search; use LWP::Simple; use POSIX qw(strftime); use CGI::Carp (fatalsToBrowser); $now = &time_now; $today = &date_today; # check first to see if we have any cgi requests &read_cgi_input; print "Content-Type: text/html\n\n"; &read_config_file if ($FORM{'config_file'} eq "1"); &write_config_file if ($FORM{'write_config'} eq "1"); &print_admin if ($FORM{'admin'} eq "show"); &list_qids if ($FORM{'list_dirs'} eq "1"); &delete_select if ($FORM{'delete'} eq "select"); # end cgi stuff &check_files; # make sure we have what we need open(LOG, ">$sTEMP"); # to manage our index summary. Perhaps hash it? print "
\nScript started at $now\n" if ($verbose);
&read_local_config;
foreach $qs (@input) {
($engine,$search_name,$query,$options,$max,$qid) = split (/\|/, $qs);

    # Process any user defined search options 
    foreach my $so (split(/&/, $options)) {
    $so = $so . "\n";
    push(@options, $so);
    }

 if (defined($options)) {
     $query_options = {};
      foreach my $sPair (@options) 
      {
    my ($key, $value) = $sPair =~ m/^([^=]+)=(.*)$/;
    &add_to_hash($key, &WWW::Search::escape_query($value), $query_options);
    }
    }

print "Searching $search_name using $engine\n" if ($verbose);
print LOG "Summary Results for $search_name\n" if ($print_summaries eq "1");

&do_search;

print LOG "$iHTML\n" if ($print_summaries);
print LOG "Detailed Search Results by Date for $search_name
\n";
$iHTML = '';
&build_date_links;
} # for ea $qs
&finish_up;
$ftime = &time_now;
print "Script Finished at $ftime\n" if ($verbose);

print <Index.html
INFO

exit 0;


# The 3 Subs below control the apperance of your web pages.
# The HTML can be edited to your preferences.
######################################################
sub print_ihead {

# This inserts HTML into the index.html file
$ihead = ("


Index of X-Search Results




Current Search's being Tracked by X-Search


");
return $ihead;
}

######################################################
sub print_dhead {

# This is our custom head we can print for the dated saved
# results. You can edit the head all you want, just leave
# the  comment tag alone!

$dhead = ("



Search results for: $query




$search_name




 Detailed Search Results for $now
\n"
);
return $dhead;
}

######################################################
sub print_footer {

# Prints a footer to our pages.  My Version and Email line
# should be left in place. You may edit anything else.

$footer = ("



X-Search $VERSION by Jim Smyser


");
return $footer;
}

# End of HTML display subs


###################################################
sub time_now {
    return strftime("%m/%d/%Y %H:%M:%S", localtime(time));
}

###################################################
sub date_today {
    return strftime("%b %d, %Y", localtime(time));
}

###################################################
sub file_time_stamp {
    return strftime("%Y%m%d", localtime(time));
}


######################################################
sub do_search {

$max= "100" if (!$max); # set a default in the event no max was defined

# Load stored url's we have already seen
open(OLD, $oURLS) || die "$oURLS failed to be opened: $!\n"; 
while() { 
    $old{$_}++; # store in hash key cuz I may have future ideas for using it
push(@old, $_);
} 
close(OLD); 

# record any new urls we haven't seen before to our dat file
open(URLS, ">>$oURLS");


 my $search = new WWW::Search($engine);

  $search->{_host} = $host if defined($host);
  $search->{_port} = $port if defined($port);
  $search->http_proxy($ENV{'HTTP_PROXY'}) if ($ENV{'HTTP_PROXY'});
  $search->http_proxy($ENV{'http_proxy'}) if ($ENV{'http_proxy'});
  $search->native_query(WWW::Search::escape_query($query), $query_options);

  $search->maximum_to_retrieve($max); 

      while (my $result = $search->next_result()) { 
    $url = $result->url;
    $title = $result->title;
    $desc = $result->description;
    # because dejanews returns different baseurl's for the same page
    # from subsequent searches we need to force a consistent baseurl 
    # or we will end up printing the same results over and over.
    # this may well be the case for some other news sources as well 
    $url =~ s/x\d+\.deja.com/x62.deja.com/g; # deja url hack 
    $url =~ s/CONTEXT=.*?&hitnum=.*?&//g; # Don't need this in the deja url, saves space 
    # ?'s and +'s can be problematic
    $url =~ s/\?/%3F/g; # gotta escape those '?'s'  
    $url =~ s/\+/%2B/g; # do +'s too  
    $url =~ s/\$/%24/g; # do $'s to be safe  
    if ($url) {
    foreach $oline (@old) {
    $url = '' if ($oline =~ m/$url/i);
    }
    }
    &head_check if ($ck_url);

    print URLS "$url\n" if ($url ne ''); # record what we have not seen before
    # next line we print to our dateXXXX.html file
    $desc = "(No Description)\n" if (!$desc);
    $url =~ s/%3F/\?/g; # unescape the escaped  
    $url =~ s/%2B/\+/g;    
    $url =~ s/%24/\$/g;   
    $dHTML .= "$title
$desc\n" if ($url ne '');
    # next line we use to print to our main index.html (Summary)
    $iHTML .= " $title
\n" if ($url ne '');
    }
    $iHTML = "No Summary for Most Recent Search\n" if (!$iHTML);
    $query_options = ''; 
    &check_date_file; 

} # end do_search


######################################################
sub head_check {

# verify if a given url is good or bad (optional)
return if ($url eq ''); # Don't bother, already seen it
if (head($url)) {
     print "URL is GOOD\n" if ($verbose);
     } else {
     print "$url is BAD\n" if ($verbose);
     print URLS "$url\n";   # make sure we record the bad url
     $url = ''; # get rid of it
     }
return;
}

###############################################################
sub check_date_file {

  # here is where we build our dated search results files
  # that we are tracking over time
  print "No new results for: $search_name\n" if (!$dHTML && $verbose);

  goto DONE if (!$dHTML);
  print "Writing results for: $search_name\n" if ($verbose);
  my($file) = (&file_time_stamp).'.html';
  if (open (DATE,'<'."$iDIR/$qid/$file") ) { 
    # it exists
    close (DATE);
    } else { 
    # nope it does not exists
    if (mkdir ("$iDIR/$qid", 0755) ) {
    if ($! =~ m/file exists/i) { # already done
     die "Can't create directory $iDIR.\nReason $!";
      }
      }
    chmod 0755, "$iDIR/$qid" || die "Can't chmod directory $iDIR/$qid.\nReason $!";
      open (HTML,'>'."$iDIR/$qid/$file") || die "Can't open $file.\nReason: $!\n";
      print HTML print_dhead($dhead);
      print HTML "$dHTML"; # print new html: newest search results on top
      print HTML print_footer($footer); # print a new footer
      close (HTML);
      goto DONE;
      }

      # if the file already exists for the date we will attempt to append
      # new results to it....
  if (-e "$iDIR/$qid/$file") { # file exists: append it
      open (HTML,'<'."$iDIR/$qid/$file") || die "Can't open $file line 195. Reason: $!\n";
      @html = ;
      close (HTML);
      foreach $line (@html) {
      # We are only interested in our links here
      # You should update this if you print fancier links
      $cHTML .= $1 if ($line =~ m@(.*?
)@i);
      $cHTML = $cHTML."\n" if ($cHTML);
      $cHTML =~ s/^\s+//g if ($cHTML);
      }
      close (HTML);
      open (HTML,'>'."$iDIR/$qid/$file") || die "Can't open $file.\nReason: $!\n";
      print HTML print_dhead($dhead);
      print HTML "$dHTML"; # print new html: newest search results on top
      print HTML "$cHTML"; # print the current html links back
      print HTML print_footer($footer); # print a new footer
      close (HTML);
      goto DONE;
    } else {
    # create one
      open (HTML,'>'."$iDIR/$qid/$file") || die "Can't open $file. Reason: $!\n";
      print HTML print_dhead($dhead);
      print HTML "$dHTML"; # print new html: newest search results append
      print HTML print_footer($footer);
      close(HTML);
      goto DONE;
}
DONE:
      # prepare for next loop
      $query_options = ''; 
      $query = '';
      $options = '';
      $engine = '';
      $cHTML = '';
      $dHTML = '';

}

############################################
sub build_date_links {

# Basically I am just reading the $qid directory and getting
# a list of existing file names and etracting the date from the
# comment tag to build links with and copying saving that data to 
# my temp file for later. Will only build links for active searches.
$qdir = "$iDIR/$qid/";

# hack test incase a user deleted a qid directory and not removed 
# it from the configuration file!
 if (opendir (DIR, $qdir)) { 
     # Looks like it exists
     closedir (DIR);
     } else { 
     # better make one
     if (mkdir ($qdir, 0755) ) {
     if ($! =~ m/file exists/i) { # already done
     die "Can't create directory $qdir.\nReason $!";
    }
    }
    chmod 0755, $qdir || die "Can't chmod directory $qdir.\nReason $!";
    }

opendir (DIR, $qdir); 
@datfiles = grep !/^\.\.?$/, readdir(DIR);
closedir (DIR);
foreach $dfile (@datfiles) {
      $datpath = $qdir . $dfile;
      open (FILE, $datpath);
      @datfile = ;
      close (FILE);
      foreach $datline (@datfile) {
$fdate = $1 if ($datline =~ m@^@i);
} # for each data file
$fdate = "Search Results for: $fdate
\n" if (defined($fdate));
push(@dated_files, $fdate) if (defined($fdate));;
$fdate = '';
}
print LOG reverse sort(@dated_files);
undef @dated_files;
return;
}

###############################################################
sub check_files {

# just a dumb sub to make sure we have some files needed to work
# with and they have read/write permissions

 if (open (URLS,'<'."$oURLS") ) { 
    # Looks like it exists
    close (URLS);
    } else { # make a file.
    open (URLS,'>'."$oURLS");
    close(URLS);
    # Ok we have one now!
    }
# check to make sure we can read/write to the temp file we
# use for building the index.html

 if (open (TEMP,'<'."$sTEMP") ) { 
    # Looks like it exists
    close (TEMP);
    } else { # make a file.
    open (TEMP,'>'."$sTEMP");
    close(TEMP);
    # Ok we have one now!
    }
#Check to see if we have a index.html file

 if (open (INDEX,'<'."$iDIR/index.html") ) { 
     # Looks like it exists
     close (INDEX);
     } else { 
     # better make one
     if (mkdir ($iDIR, 0755) ) {
     if ($! =~ m/file exists/i) { # already done
     die "Can't create directory $iDIR.\nReason $!";
    }
    }
    chmod 0755, $iDIR || die "Can't chmod directory $iDIR.\nReason $!";
    }
return;
}

######################################################
sub finish_up {

# Basically just close some files and write a new index.html 
# and were done

close(URLS);
close(LOG);

open (TEMP,'<'."$sTEMP") || die "Can't open TEMP. Reason: $!\n";
@html = ;
close (TEMP);
foreach $line (@html) {
$sHTML .= $1 if ($line =~ m@(.*)@i);
$sHTML = $sHTML."\n";
$sHTML =~ s/^\s+//g;
}

open (INDEX,'>'."$iDIR/index.html") || die "Can't create index.html in $iDIR: $!";
print INDEX print_ihead($ihead);
print INDEX "\n";
print INDEX "$sHTML";
print INDEX print_footer($footer);
close(INDEX);
$sHTML = '';
}

######################################################
sub read_local_config {

open (PATH, "$qconfig") || die 
"We need a configuration file with defined search commands. No search commands read!. $!";

@datfile = ;
close (PATH);
foreach $datline (@datfile) {
if ($datline =~ m@^(\w+.*)$@i) {
$ds = $1;
push(@input, $ds);
}
}
return(@input);
}

######################################################
sub add_to_hash
  {
  # This is a bit of a hack.  A set of CGI options is not strictly a
  # hash, because multiple values for the same key can be specified.
  # To get around this, we rely on the fact that this hash of options
  # is only used to construct a CGI parameter list.  If we see
  # multiple values for the same key, we append the multiple values
  # onto the value of the key in CGI '?key=value' format.
  my ($key, $value, $hashref) = @_;
  if (exists($hashref->{$key}) && $hashref->{$key} ne '')
    {
    # There was already an option of this key given; append
    # multiple values as CGI arguments:
    $hashref->{$key} .= "&$key=$value";
    } # if exists
  else
    {
    # This is the only instance of this key; just insert the
    # hash value:
    $hashref->{$key} = $value;
    }
  } # add_to_hash

#####################################################
sub read_cgi_input {

    local ($method, $query, @keypairs, $keyvalue, $key, $value);
    $method = $ENV{'REQUEST_METHOD'};
if ($method eq "GET") {
    $query = $ENV{'QUERY_STRING'};
    } elsif ($method eq "POST") {
    read (STDIN, $query, $ENV{'CONTENT_LENGTH'});
      } 
      else 
      {
    local ($msg) = "Unsupported method: $method\n";
    }
    @keypairs = split(/&/,$query);
    foreach $keyvalue (@keypairs) {
      ($key,$value) = split(/=/,$keyvalue);
      $key =~ tr/+/ /;
      $key =~ s/%([\dA-Fa-f][\dA-Fa-f])/pack("C",hex($1))/eg;
      $value =~ tr/+/ /;
      $value =~ s/%([\dA-Fa-f][\dA-Fa-f])/pack("C",hex($1))/eg;
    if (defined($FORM{$key})) {
    $FORM{$key} = join("\0",$FORM{$key},$value);
    } else {
    $FORM{$key} = $value;
    }
    }
    foreach $key (sort keys %FORM) {
    $keyword .= $FORM{$key};
    }

    }

################################################
sub print_admin {

print <

X-Search Admin Page




X-Search Admin Setup Page

Configuration file defined: $qconfig
 
Note: The above configuration is the one defined within the X-Search
script.



Below is a template for adding new search commands to X-Search. It is
advisable that inexperienced users use the template in order to create the
proper syntax to add to their configuration file.
 
Summary:

Engine Name: Search engine name used by a WWW::Search backend.

Search Name: Nice name describing the search topic and used as a headline in
your pages.

Query: Search words you are interested in tracking.

Options: Search options to pass to the backends. This is optional and can be
left blank. 

Max: Define how many results to return at once.

qid: The name of the folder/directory to store this search dated pages. Just a
unique directory name, no paths. 












Fill in the template below using the above sample structure:












 



TOP

# Display current configuration file to user

if (-e $qconfig) {  # configuration file exists 

open (FILE, $qconfig) ;
@config = ;
close (FILE);
foreach $line (@config) {
$tdata .= $1 if ($line =~ /^(\w.*)/i);
$tdata = $tdata . "\n";
} # dat lines
}

print <



Current X-Search Configuration File Settings


Advance user's can directly edit the configuration file without using the
above template below. Modify current search commands or add and remove entire 
command lines. Click "Save Changes" to write the new changes to file. Note: If
the below text area is blank, this means the configuration file does not yet
exists and you should add search commands to create one from this form.


$tdata






 


  Manually Execute X-Search to conduct a search run. If you have
verbose "on" you will be presented with a page detailing the search results
as well as a link to the index.html file after the script has stoped running.





  Perform directory maintenance by deleting selected unwanted qid directories
from disk.





BOTTOM
exit;

}
#########################################################
sub read_config_file {

  if (-e $qconfig) {  # configuration file exists 
  
  open (FILE, $qconfig) ;
  @config = ;
  close (FILE);
  foreach $line (@config) {
  next if ($line =~ m@^$@); # avoid blank lines
  $tdata .= $1 if ($line =~ /^(\w.*)/i);
  $tdata = $tdata . "\n";
  $tdata =~ s/^\s+$//g; # remove blank lines 

  $tdata = '';
  } # dat lines
  } else {
 print qq{
No Config File Found.




Configuration file not found.
}
  } 
&print_admin;

}

########################################################
sub write_config_file {

$engine = $FORM{'engine'};
$search_name = $FORM{'search_name'};
$query = $FORM{'query'};
$options = $FORM{'options'};
$max = $FORM{'max'};
$qid = $FORM{'qid'};
$tdata = $FORM{'textlines'};
print "$tdata\n";
if ($tdata) {
   $tdata =~ s/\015//g; # remove ^M's 
   open(UI, ">$qconfig") || die "Can't open $config_file: $!\n"; 
   print UI "$tdata"; 
   close(UI); 
   print "

X-Search Configuration file been updated.\n";
&read_config_file;
exit;
}

  if ($engine =~ /^\s+$/ || $search_name =~ /^$/) { ## Empty uid not allowed 
  print "

Missing engine or search name!!\n"; 
  exit;
  }
  if ($query =~ /^\s+$/ || $qid=~ /^$/) { ## Empty uid not allowed 
  print "

Missing query or qid.\n"; 
  exit;
  }

  open(UI, ">>$qconfig") || die "Can't open $qconfig $!\n"; 
  print UI "$engine|$search_name|$query|$options|$max|$qid|\n"; 
  close(UI); 
  print "

X-Search Configuration file been updated.\n"; 

&read_config_file;
}

################################################
sub list_qids {

# list all the sub directories created
 for $subs ($iDIR) {
  while (<$subs/*>) { 

   if (-d $_) {
   $_ = $_ . "\n";
   push(@dirlist, $_);
   }
   }
  }

print "Delete Unwanted qid Directories
\n";
print "Check directories to remove and then click Remove Selected to remove.
\n";
print "
\n";
print "\n";

foreach my $sdir (@dirlist) {
print "  $sdir
\n";
} # for ea

print <





END
exit;
}

################################################
sub delete_select {

$keyword =~ s/ //g;
$keyword =~ s/\s+//g;
$keyword =~ s/select//g;
$keyword =~ s/^#//g;

foreach my $subdir (split(/#/, $keyword)) {
$subdir =~ s/^\W//g;  # for win32 
$subdir = "/" . $subdir if (not $subdir =~ m/^\//)  && ($iDIR =~ m/^\//); # hack for disapearing ^/ 
next if $subdir =~ /^\s+$/;
unlink <$subdir/*.*> or warn "Couldn't delete files in $subdir: $!\n";
rmdir($subdir) or warn "Couldn't remove $subdir: $!\n";

}

&list_qids;
}


__END__

=head1 NAME

X-Search -- Automated Web Searching and Search History Indexing

=head1 SYNOPSIS

use WWW::Search;
I

Search commands are read from a configuration file.

=head1 DESCRIPTION

I reads a series of search commands from a plain text
configuration file and then retrieves the results from the specified
search engine and stores them in individule dated files
F which is a detailed web page record of the search
results for the days date. Summaries of each search (if you have print
summaries turned on) as well as a link history to each
F file are maintained in one F file.

Any new search results for a 24 hour perioud are written to both the 
F and F files. If F 
already exists with previous search results for the date then it will be
appended with newer results in a chronological order. If there is nothing new
then nothing is written. 

I stores the url's from search results to a data file enabling 
it to track what it already has seen. This insures subsequent searches are
unique and allows one to copy additional undesirable urls in blocks to this
file to prevent X-Search from recording them if they are ever encountered 
in a future search (Filtering). 

I is ideal for maintaining records of frequent news events and
can safely be run as many times as desired daily to determine new news
events to index that matches the users search requirements. For
instance: You could track any number of newsgroups three times daily for
new posts by passing the search option "groups=". So, in the option
field in the configuration file you could insert |groups=alt.some.group|
or, if you wanted to search all groups related to perl you could do
this: |groups=*perl*|

I is ideal for web sites to present to their users detailed dated
summaries of specific topics around the web that can change frequently. Thus,
users are presented with the most current new additions as found in a pretty
informative chronological order that relates to some subject matter. X-Search
makes an ideal research tool for tracking and indexing latest additions.

I Allows the option of verifying the url address to determine if
it is valid or not. Any url's that are found not valid, i.e., moved, not
found, are ignored.

I allows one with a lot of flexibility to use in all sorts of
neat applications.

(SEE =head1 REMOTE ADMINSTRATION for remote opertaion via a web browser)

=head1 CONFIGURATION FILE

I is controled by a configuration file. This file can be
any name you want. There are two methods to tell I what
configuration file to use and where. 

Method 1: Simply define $qconfig in the script to point to the
configuration file. By default it looks for a file called "query.ini"
located in same directory as X-Search which should be fine for most. 

Method 2: Command line argument defining path and name of the
configuration file. Example:

X-Search /home/xsearch/search.conf

I would read /home/xsearch/search.conf for it's search commands.
This allows easily using multi configuration files for different search
setups.

This file is read to get the following user defined search
commands:

  1) The WWW::Search backend to use for the search 
  2) A nice Name description for the search topic to be
     printed within the web pages. This is like a headline. 
  3) The query search words for the search seperated by a space
  4) Any search options to pass to search engine. This is optional 
     and can be left blank.
  5) Max results to return
  6) The B, query information directory, the directory name 
     to create to store dated web pages created from the search.

A typical configuration file would have one or more lines that
follow this structure:

SEARCH ENGINE|SEARCH NAME|SEARCH WORDS|OPTIONS|MAX_TO_RETURN|QID|

The individule values are seperated with a | and a | must be found
at the end of each line. There is no limit to how many searches you
can define in the configuration file, but you may want to keep it
resonable and to aid in managing multi searches, there is the 
option of turning off/on summaries being displayed in B.

Here is a sample of what a typical configuration file should
look like:

------cut------------------

HotBot|Military|tank armor|RD=DM&Domain=.mil|40|tanks|
Google|Tech News|parallel processing||200|parallel| 
Excite::News|News From Home|Palm Springs California||100|myhome|
AltaVista|AZ Fishing|arizona lakes fishing||60|lakes|

--------end-----------------

The Google command line would search the engine Google, print a 
nice list heading titled "Tech News", search and display results
pertaining to "parallel processing", with no options, return a max
of 200 results and store the dated search history pages in a directory
called "parallel".

Obiviously, you want to define different qid names for all your different 
searches so that hot dog searches don't end up mixed with apple searches.
But, at same time you can merge different searches to one date qid file
as well. This is up to each user to determine for themselves.

Note About Options

Multiply option pairs must be seperated with '&'. See HotBot search
example above.

Using the Administration Form built into X-Search makes all the above
much easier to manage remotely from a browser.

=head1 REMOTE ADMINSTRATION

I is capable of being run and configured remotely on a server via
it's Administration form. This allows one to: a) remotely
edit/add/remove search commands b) remotely execute X-Search manually in
the event you do not have a need for or access to the cron function.

To use on a remote server you of course will need WWW::Search installed
and available on that server. Before uploading X-Search to your server
you will need to set the path within the X-Search script as to where the
index directory will be created and this should be the absolute path to
your root directory. Example on a RedHat system you would enter
"/home/httpd/html/xsearch" (no trailing "/" slash) or some other directory
name other than "xsearch" if you prefer. Then you can just use
http://myaddress.com/xsearch to access your index.html page.

You will need to chmod X-Search.pl to 755 as well as the cgi-bin
directory itself to work properly under Unix once you have uploaded to
your server. My cgi-bin directory was not 755 and it did not work right
till I chmod it to 755.

Win32 users can get away with doing nothing and X-Search would just by
default build off the cgi-bin without any problems.

If you followed all the above you can then enter admin mode by typing:

http://myaddress.com/cgi-bin/X-Search.pl?admin=show

You should then be presented with the X-Search Administration page.

If you already have created a configuration file it will be displayed in
the text area of the page, if not, it will be blank till you add some
search commands. Creating search commands for X-Search is pretty easy in
admin mode since I provide you with a template to fill out that will add
the right syntax to the configuration file. More experienced users can
use the text area to directly edit their configuration file. You can
edit, add and remove pre-existing command lines this way remotely.

At the bottom of the administration page is a button to run X-Search.
This way you can remotely execute X-Search in a timely manner through
your browser, say once a week. After the script is completed you can
then navigate to the URL address of your X-Search index.html to view any
new search additions.

There is also a qid maintenance button that allows for viewing and 
removing qid directories. Unused directories undoubtly build up over
time and this is a good way to remove them from disk.

=head1 AUTO SEARCHING

X-Search can be run from a cron job to automate searching even more.

Example to run X-Search each Monday at 3:00 AM:

    0 3 * * 1 /home/xsearch/X-Search

or if you want to specify a configuration file:

    0 3 * * 1 /home/xsearch/X-Search /home/xsearch/cofig.conf

=head1 CHANGING THE APPERANCE OF THE WEB PAGES

I web pages are easily customizable by simply changing the html
in the subs "print_ihead" and "print_dhead". The sub print_idead produces
the html for the index.html file. You can add whatever body tags you
desire like background colors, images, fonts, etc. The sub print_dhead
controls the html that goes into F files. 

There is also a "print_footer" sub that prints a footer for all the
pages, and I ask that my name and e-mail address remain intact if you
decide to customize the footer as well. (Publicity is my only payment
from this :-)

=head1 USER SETTINGS

There is a number of user settings that control the behavior of X-Search
which is hard coded into the script.

=item $verbose

This just prints messages to screen while the script is running. This is
nice for manual operation but not needed if run by cron. 

=item $ck_url   

$ck_url = "1";

$ck_url will verify if url's are good or bad. 0=No 1=Yes Setting $ck_url
can slow the search down depending on how many bad urls are encountered.

=item $iDIR

$iDIR = "c:/server/root/html/xsearch";  

Full absolute directory path/name to store the main index.html file.
B directories will be created below this directory. For manual
command line operation you can just define this as "./xsearch" to create
a directory name "xsearch" under where you execute X-Search.pl.

REMOTE SERVER CONSIDERATIONS

Running remotely $iDIR should be pointed to the root directory, for
example on RedHat you should define the path as:

"/home/httpd/html/xsearch" 

In this way the url address to your index.html page would be
http://myaddress.com/xsearch/index.html. Of course, "xsearch" can be any
name you desire for the directory.

=item $index_url

$index_url = "http://127.0.0.1/xsearch/";

This is optional and used for remote administration to print a link
to your index.html directory so you have a link to click after
you have executed X-Search from your browser.

=item $print_summaries

$print_summaries = "0";

1=Yes 0=No

If you have many search events defined and running you may want to turn
off printing summary results to keep the index.html file size within
reason. Only links to the detailed F pages will be
printed. Turn it on if you want summaries to be displayed in index.html

=item $oURLS

$oURLS = "urls.dat";

Define the name of our url's record file. Without this we are lost.

=item $qconfig

$qconfig = "query.ini"; 

Define path and name of the query configuration file. This file stores
the search command, such as engines to use, search string, qid
directory, max to return and so forth.  You MAY also pass this value as 
a arugument so you can run multi configuration files by defining their
name and path as a commandline argument.

=item $host $port
 
$port = "";
$host = "";

Define a host/port if required (most don't need to)

=item $sTEMP

$sTEMP = "TEMP";

This just defines a name for temporary working file X-Search uses to
build a index.html file. No need to mess with it.

=head1 CHANGES

Version 1.06

 - Added a admin qid directory maintenance function so users can
   delete unwanted qid directories or simply list what qid directories
   have been created. Minor misc. Admin functions tweaking especially
   under win32.

Version 1.04

 - Added remote administration so one can run X-Search or edit the
   configuration file through their web browser. This allows one
   to run X-Search as a CGI script on their server.

Version 1.03

 - Created a hack to track Dejanews articles properly
 - added escaping and unescaping ?'s in urls because 
   they would raise havoc with my regex leading to urls
   being printed over and over

=head1 AUTHOR

X-Search was written entierly by Jim Smyser E.

=head1 BUGS

X-Search only been tested under RedHat and NT, it is unknown whether it
will function under other OS's.

=head1 COPYRIGHT

Copyright (c) 2000 by Jim Smyser All rights reserved.                                            
                                                               
You my use this program source provided that the above copyright notice
and this paragraph are duplicated in all such forms and that any
documentation, advertising materials, and other materials related to
your distribution of this source code and use acknowledge Jim Smyser as
the author/developer. 

THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.