Converting a UNIX
.COM Site to Windows Microsoft
Internal Distribution This white paper discusses
the approach used to convert the Hotmail web server farm from UNIX
to Windows 2000, and the reasons the features and techniques were
chosen. It will focus primarily on the planners, developers, and system
administrators. The purpose of the paper is to provide insight for
similar deployments using Windows 2000. We will discuss the techniques
from the viewpoint of human engineering as well as software engineering. Early results from
the conversion, which was limited to the front-end web servers, are:
n
Windows 2000 provides much better throughput than UNIX.
n
Windows 2000 provides slightly better performance than UNIX.
n
There is potential, not yet realized, for stability of individual
systems to be equal to that of UNIX. The load-balancing technology
ensures that the user experience of the service is that stability
is as good as it was before the conversion.
n
As this paper will show, while the core features of Windows 2000 are
able to run the service, its administrative model is not well suited
to the conversion. The observations related
here are derived from experience gained at a single site. More work
would be needed to establish whether they are representative.
Critical
Features of Hotmail as a .COM Site
Hotmail
Architectural Decisions
Installation Methodology Conserved
System
Creation, Mastering and Installation
OS installation and configuration
Tuning and hardening the system
Application
Installation and Update
Distribution mechanism and format
Converting
the UNIX Administrator
Microsoft acquired
Hotmail at the end of 1997 as a going concern. The service’s creators
had defined a two-layer architecture built around various UNIX systems:
n
Front end web servers, built with dual Pentium systems on racked motherboards,
running Apache on FreeBSD (a configuration with no need to install
licensed software)
n
Back end file stores, built with Sun Enterprise 4500 servers, running
Solaris 2.6 (Sun’s UNIX) and with all user data stored on RAID arrays,
accessed using very simple filing semantics
n
Incoming mail listeners, built on Sun Sparc 5 processors, and interacting
directly with the back end
n
Name/password verification engines, build on Enterprise 4500 servers
n
Member Directory, built on PCs with NT and SQL The conversion of
the Hotmail web servers to Windows is an ongoing project with several
rationales. The team was hoping for better utilization of the existing
hardware resources. The superior development and internationalization
tools are important. A Microsoft property should eat its own dogfood.
Finally, we wished to use the conversion experience as a model for
other UNIX conversions that we hope to carry out in the future. The first phase of
the conversion, described here, was limited to the web servers. Appropriate
hardware was already in place, and the planning and development staff
were confident that they already understood how to perform the conversion
successfully. There were several
constraints on the conversion process, which are probably typical
of the average Internet site:
n
Hotmail has established an 8-week cycle of version upgrades, and there
was a desire (and some partner pressure) to keep that cycle going.
n
It is essential to keep the service running continuously.
n
The staff is small, and there was not an opportunity to add staff. We believe Hotmail
is instructive as an example of the large Internet server site. It
is one of the largest such sites on the planet, so we should be judicious
in applying its principles to sites that are comparatively very
small, and don’t have the issues deriving from multiplication of resources. As stated above, we
are concentrating on the front-end web servers. Although some of the
following comments are also applicable to the database machines, we
will not address them specifically in this paper.
1)
Restricted, well-controlled application. The application under UNIX
was a collection of CGI programs, serving about 100 distinct URLs,
which have been converted to an ISAPI module. The programs are written
in C++. The entire application is under the control of one team, and
its architecture is well understood by all of the teams (dev, test
and operations). Updates are only due to scheduled code releases,
or hotfixes. This contrasts with a site like microsoft.com, which
has many different authors and continuous updates.
2)
Lights-out administration. All the servers are in a controlled facility
that may be staffed by contractors, and it should not be necessary
for skilled staff to visit the individual machines for any reason.
Machines should be self-monitoring, and Operations staff should be
able to maintain them remotely using minimal interaction.
3)
Multiple identically configured machines. This leads to a need to
have all regular system administration functions, including OS and
application update, be scripted, rapid, reliable, and non-interactive.
There is simply not time for an administrator to interact personally
with all machines. A load-balancing mechanism routes customer requests
from a virtual address to one of the real servers.
4)
System costs suffer multiplicative effects. Adding a VGA monitor or
a second NIC to a server, or running a serial cable to it, may be
pocket change when applied to a single machine. Purchasing several
thousand such devices, however, becomes a significant investment and
has to be thoroughly justified.
5)
100% availability. A large Internet site must provide service 24x7.
Furthermore, the full capacity should be available all the time. Hotmail’s
load fluctuates daily according to the time across the US, but not
by much; the international usage is high.
6)
Simultaneous upgrade. The pervious two points mean that the servers
must be upgraded essentially simultaneously, unless some kind of server
affinity mechanism can be implemented per user session. Since a typical
user interaction involves several clicks, it would not be good for
a user to jump backwards and forwards between code releases; the problems
would range from inconsistency in style to (apparently) half-implemented
new features.
7)
No personal machines or accounts. All machines are assumed to be secure
because of physical location and electrical isolation. Generally speaking,
when an administrator is operating on the server or a scheduled tasks
runs, full administrative privileges are given. This increases the
danger, but reduces the load required to maintain and synchronize
accounts.
8)
Remote monitoring. All performance monitoring is done by querying
the server or by automated reports, and monitoring uses the single
NIC. In Hotmail’s case, there is plenty of spare network headroom
on each server for this monitoring not to penalize the primary operation.
9)
No architectural limits on growth. An Internet site expects to keep
growing, and built-in limits that seem unreasonably high in the early
days will one day loom up and need to be fixed, using resources that
should be enhancing the site. Hotmail has grown from 9 million accounts
when it was acquired by Microsoft, to 100 million in July 2000, without
significant changes in the hardware or software architecture. The final four items
are more closely related to Hotmail’s architectural choices, but we
believe they are representative of the market.
10)
Scale-out. The Hotmail website is built from several modules, with
each module present in different multiples and able to be scaled out
almost indefinitely. In this phase of the project, we are considering
the front-end, the web servers that house all of the user interface
logic and some parts of the business logic. Among the servers, the
majority (“front doors”) runs some code in response to each click,
and these were the primary targets for conversion. The machines are
single-board x86 PCs, moderately powerful, using Apache, running on
FreeBSD version 3.0, to deliver content. Fortunately, these servers
are good Windows 2000 hosts. There
are also some servers that serve static content and will be almost
trivial to convert once the front doors have been converted. Administration
of these servers will use the same methodology as the front doors.
They also run on FreeBSD, using the server “boa”, which is optimized
for serving static content rapidly.
11)
Configuration conservatism. There are more than 3,000 front door machines,
all identically configured. Having the servers essentially identical
is important to the operators’ ability to administer the site. The
approach to the hardware is very conservative: once a hardware configuration
is established, it is easy to keep rolling out copies rather than
try to qualify a newer model. This
conservatism also applies to the software design. The need to run
the project on Internet Time
[1]
has an impact on this project in several ways:
in this case, designers always need to be improving the application
and there is little resource left over for redesigning the basic architecture.
Furthermore, the various modules of the site are developed independently,
creating a force for stability in the internal protocols.
12)
Design for stability. Virtually continuous uptime and a consistent
response time are crucial. This is achieved by some overcapacity,
and highly reliable load-balancing hardware (Cisco Local Director).
Local Director is just another module in the scale-out solution.
13)
Controlled and understood systems. A fact about UNIX is that it is
easy for an administrator to ensure that there are no irrelevant services
running. As well as giving the potential for maximizing performance,
it is useful to be sure that there are no random TCP/IP or UDP ports
open that could be used as a basis for an attack. To some, this transparency
is intrinsic to UNIX, but it also comes from a greater familiarity
among system administrators with its internal workings. The headless nature
of the systems, and their remote location, have a profound influence
on the way the systems are administered. Headless operation means
that any direct interaction will be through a remote session (telnet
or Terminal Server); nobody will be able to detect an important dialog
on the console
[2]
, and even a bluescreen is not apparent. Remote
operation means that there is a specific cost associated with walking
up to the machine. The site is serviced by contractors whose job is
mainly limited to replacing failed servers and rebooting on demand;
it is possible to attach a monitor and keyboard to a running system,
but that is operationally an exception. Commonly, although
not strictly correctly, the generic term UNIX describes a family of
operating systems that are deployed on a variety of systems. Although
their internal design may be different, the variants appear to their
end-users as the same system, with minor (and annoying) differences
in usage. There are two variants in use at Hotmail: FreeBSD, which
can be used without license cost and is available in source form,
and Solaris, which is bundled with Sun hardware. Linux, which is just
another UNIX variant, was not used at Hotmail. The following sections
will examine facts about UNIX (specifically FreeBSD) as they relate
to the conversion problem. We also consider Apache as an intrinsic
part of the UNIX-based solution, in the same way that IIS is an intrinsic
part of Windows 2000 Server.
1)
Familiarity. Entrepreneurs in the startup world are generally familiar
with one version of UNIX (usually through college education), and
training in one easily converts to another. When setting up a new
enterprise, it’s easy to work with what you know than to take time
investigating the alternatives.
2)
Reputation for stability. Both the UNIX kernel, and the design techniques
it encourages, are renowned for stability. A system of several thousand
servers must run reliably and without intervention to restart failed
systems. For Windows 2000, we must first prove the stability in the
same environment, and we must then convince the rest of the world. Apache
is also designed for stability and correctness, rather than breadth
of features or high performance demands.
3)
FreeBSD is free. Although there are collateral costs (it’s not particularly
easy to set up) the freedom from license costs is a major consideration,
especially for a startup. The free availability of source also means
that it can be fairly simple (or it can be very difficult) to make
local changes
[3]
.
4)
Easy to minimize. The typical UNIX server is taking care of one task,
not acting as a desktop and development platform for a user. It is
particularly easy to cut down the load on the system so that only
the minimum number of services is running. This reduced complexity
aids stability and transparency.
5)
Transparent. It’s easy to look at a UNIX system and know what is running
and why. Although its configuration files may have arcane (and sometimes
too-simple) syntax, they are easy to find and change.
6)
Preference for text files. Most configuration setups, log files, and
so on, are plain text files with reasonably short line lengths. Although
this may be marginally detrimental to performance (usually in circumstances
where it doesn’t matter) it is a powerful approach because a small,
familiar set of tools, adapted to working with short text lines, can
be used by the administrators for most of their daily tasks. In particular,
favorite tools can be used to analyze all the system’s log files and
error reports.
7)
Powerful but simple scripting languages and tools. Again, familiarity
and consistency among UNIX implementations is the key. Over the years,
UNIX versions have evolved a good set of single-function commands
and shell scripting languages that work well for ad-hoc and automated
administration. The shell scripting languages fall just short of being
a programming language (they have less power than VBScript or JScript).
This may seem to be a disadvantage, but we must remember that operators
are not programmers; having to learn a block-structured programming
language is a resistance point. Scripts that combine executables into
pipelines are simple to build incrementally and experimentally, and
even the experienced Hotmail administrators seem to be taking that
approach for special purpose scripts (using CMD) rather than authoring
with one of the object-oriented scripts. On
the other hand, PERL (another language that has grown organically
with a lot of community feedback) is more of a programming than scripting
language. It is popular for repeated, automated tasks that can be
developed and optimized by senior administrative staff who do have
the higher level of programming expertise required. Consider the above
list of UNIX strengths to be also a list of Windows weaknesses. However,
there are some specific issues that need to be called out.
1)
A GUI bias. Windows 2000 server products continue to be designed with
the desktop in mind. There are too many functions that are either
too difficult or impossible to perform using a text-based interface. Why
is this important? There are several reasons:
n
GUI operations are essentially impossible to script. With large numbers
of servers, it is impractical to use the GUI to carry out installation
tasks or regular maintenance tasks.
n
Text-based operations are more versatile; an administrator can usually
do more to a system (good and bad) than is provided by the restricted,
planned methods using the GUI.
n
There is in place at Hotmail an established secure channel into the
production system, using a text-based secure shell interface.
n
Using a GUI amounts to hiding the true system modifications from the
system administrators and operators. UNIX operators like the sense
of control that comes from their ability to modify system tables and
configuration files more directly.
n
Operating a GUI through a slow network connection can be too slow
to be useful. Although this is less important, it can still be a consideration
when there is a need to administer or diagnose a system through a
dialup connection. There
are, indeed, many non-GUI administrative programs provided in the
core Windows 2000 product and in the Resource Kit. The problem is
that the collection is somewhat arbitrary, incoherent and inconsistent.
Programs seem to have been written to fill an immediate need and there
is stylistic inconsistency and poor feature coverage.
2)
Complexity. A Windows server out of the box is an elaborate system.
Although it performs specific tasks well (such as being a web server)
there are many services that have a complex set of dependencies, and
it is never clear which ones are necessary and which can be removed
to improve the system’s efficiency.
3)
Obscurity. Some parameters that control the system’s operation are
hidden and difficult to fully assess. The metabase is an obvious example.
The problem here is that is makes the administrator nervous; in a
single-function system he wants to be able to understand all of the
configuration-related choices that the system is making on his behalf.
4)
Resource utilization. It’s true that Windows requires a more powerful
computer than Linux or FreeBSD. In practice, this is a less important
constraint. When you are building a large operation, you will use
smaller numbers of relatively powerful systems. The PC systems in
use at Hotmail are perfectly capable of running Windows, and the machine’s
basic power is the same whether it is run with UNIX or Windows. For
most of the time, it is only executing application code and most of
the extra elaboration is not apparent.
5)
Image size. The team was unable to reduce the size of the image below
900MB; Windows contains many complex relationships between pieces,
and the team was not able to determine with safety how much could
be left out of the image. Although disk space on each server was not
an issue, the time taken to image thousands of servers across the
internal network was significant. By comparison, the equivalent FreeBSD
image size is a few tens of MB.
6)
Reboot as an expectation. Windows operations still involves too many
reboots. Sometimes they are unnecessary, but operators reboot a system
rather than take the time to debug it. For example, a service may
be hung, and rather than take the time to find and fix the problem,
it is often more convenient to reboot. By contrast, UNIX administrators
are conditioned to quickly identify the failing service and simply
restart it; they are helped in this by the greater transparency of
UNIX and the small number of interdependencies. Some reboots are demanded
by an application installation, and are not strictly necessary.
7)
License costs. As we will see when discussing load balancing, the
license cost of Windows software is a major consideration when converting
from the unencumbered UNIX implementations. Although there were no
costs to the Hotmail project, as a Microsoft department, the team
did consider the software costs in order to make the conversion a
useful model for future customers.
n
They used Server in preference to Advanced Server (no features of
Advanced Server were necessary).
n
They reluctantly used Services for UNIX and Interix, to get access
to features that were not adequately provided in Windows. Future releases
of Windows will have the features that would make it unnecessary to
add those subsystems and avoid their notional cost.
n
No business analysis was undertaken to determine whether the benefit
of the conversion would outweigh the notional cost of the Windows
licenses.
1)
Windows has more resources behind its development. It does have greater
complexity than the free UNIX distributions, and used wisely (and
with knowledge) that can lead to a more effective solution. For example,
IIS is more self-tuning than Apache. IIS
and Windows have many more tuning parameters than Apache and FreeBSD.
The problem here is to make them comprehensible to new administrators.
2)
The development platform, specifically Visual Studio, is a major advantage.
Even before the conversion to Windows was contemplated, Hotmail developers
used Visual Studio on NT4 to develop and debug their code. The code
was eventually recompiled for UNIX when the first level of testing
was complete. There is nothing approaching the power of Visual Studio
on any UNIX, let alone the free ones, with the possible exception
of the Java development tools. The
superior development platform has also had a positive operational
impact in the live site. In the first days of deployment, some server
threads went into a CPU-consuming loop. Using Visual Studio, Hotmail
developers were able to find the application-level problem in a few
minutes. That would have been impossible using UNIX tools.
3)
Vastly better monitoring infrastructure. UNIX has some rudimentary
event reporting and performance monitoring tools, but nothing to approach
the integrated power of the event logging and performance monitoring
features. Again, it is necessary to use them wisely; event logging
in particular has a human and system overhead that we’ll talk about
later.
4)
Better hardware detection. Setting up UNIX on a new PC is difficult,
requiring a more intimate knowledge of how the hardware is built.
That’s an up-front cost; given the existence of multiple identically
configured systems, cloning an established system doesn’t present
the same problems.
5)
Internationalization. The software tools available in Windows to provide
multiple localized solutions are far ahead of most UNIX systems. Project constraints
The constraints called
out earlier (the 8-week upgrade cycle, the need to keep the service
running, and the small number of staff) produced enough pressure on
the development and administrative staff that the team agreed to devote
one cycle to the platform conversion and not change the application
during that time. This allowed the developers and testers to focus
on the specific conversion issues. During the conversion, the application
itself was the same on both platforms. This means that a user may
have successive pages served by either platform, and not notice the
difference. The same constraints
led to a desire not to change operational practices without good reason,
because of the investment in training staff at all skill levels, and
the feeling that the fewer things were changed, the fewer were the
potential blocking problems. Finally, the economic
necessity of not adding technical staff to the conversion means that
there was no consideration given to major re-architecture of the application. Installation
Methodology Conserved
There is in place
a method of remotely bootstrapping a server to a new OS and application
suite, and converting one rack (21 machines) in about 20 minutes.
Replicating the installation capability was a goal of the project,
and conserving as much as possible of the infrastructure to do it
was strongly desired. Conversion
to ISAPI
The web server application
suite consists of about 90 different transactions, each corresponding
to a click on a web page. Using Apache, each one is implemented as
an executable program using the CGI interface, and run in a separate
process managed and owned by the web server. Processes are the natural
way of encapsulating a single stateless transaction using UNIX. Converting to Windows,
the development team decided not to use the CGI interface to IIS.
Creating a new Windows process is more expensive than creating a UNIX
process. Instead, the team converted the CGI code to run as an ISAPI
application, in which the transactions are processed by code that
(in the most basic implementation) runs within the IIS process. Running in process
will be more efficient than running as a CGI, because the process
creation overhead is avoided. We could have brought that advantage
to UNIX. Apache supports the same concept; the equivalent to an ISAPI
filter is called a module. Naturally, we did not waste time building
the module implementation just to throw it away. Conversion from CGI
to ISAPI was essentially automated by using a filter that effectively
presents the standard CG interface (using data streams and environment
variables) to the user code. Because the application code was well
written and did not make assumptions about its environment, the major
part of the conversion went very smoothly and did not require significant
unexpected engineering
[4]
. There were some intentional pieces of re-engineering:
n
The spell, dictionary, and thesaurus functions were rewritten to use
Microsoft technology from Office and Encarta. The UNIX versions use
binaries from Merriam Webster. The spellcheck feature is much improved;
there are coverage problems with the dictionary data that need to
be addressed.
n
The SMTP service of IIS was used to handle outgoing mail, replacing
a UNIX standard mail service.
n
Virus scanning of attachments used an external UNIX utility from McAfee;
this was replaced by its NT equivalent. The most challenging,
and anticipated, problem with converting from CGI to ISAPI derives
from the forgiving nature of the CGI architecture. Memory leaks, unclosed
files and similar problems can be tolerated, because they are automatically
cleaned up when the CGI process terminates. Even an occasional abort
is tolerated; it results in an invalid page to one customer, but does
not usually affect any other part of the system. By contrast, ISAPI
modules share a process with the web server, as do Apache modules.
Resource leaks will accumulate, and crashes have the potential to
bring down the server (although not the entire service, thanks to
load balancing). There are process isolation techniques available
in IIS to minimize these problems, but the team decided to use the
in-process model for full efficiency. Among the actions taken:
n
Use a private heap that is cleared at the end of each web transaction.
n
In testing, monitor for resource leaks and fix them.
n
Implement an IIS heartbeat monitor that will quickly notice and restart
any failed IIS service. Converting to ASP
was not considered. That would have been a complete rewrite of the
application, with no great advantage (Hotmail does not use a WinDNA
infrastructure, for example). In fact, the implementation uses some
ASP ideas and terms, as much of the user content is determined by
template files that look like ASP files, but the interpretation engine
is completely homegrown. One motivation for borrowing ASP syntax was
to use Microsoft development tools (for example, to aid internationalization). Load Balancing
Technology
Hotmail has a large
investment in Cisco Local Director;
every web access goes to an LD, which redistributes the load among
real servers. Hotmail chose to continue with LD, rather than use the
Windows load balancing technology, because the infrastructure was
in place and did not need to be reconfigured (reducing the learning
curve). Also, LD fits the Hotmail model well; it is possible to place
up to 400 servers behind the virtual address, and each Hotmail cluster
can have over 300 identically configured servers. Another major issue
is the potential cost. Although Hotmail uses Microsoft software without
license fees, we must consider this project as a model for real customers.
Use of WLBS requires Advanced Server, but Server provides all the
other features used by Hotmail. Using list prices, the cost comparison
for a farm of 3500 servers is:
n
Using WLBS (hence Advanced Server): $15M+
n
Using LD and Server: $6M+ This does not take
into account any extra PCs necessary to handle WLBS overhead (administrative,
as well as the cycles needed to redirect the load) or the plans by
Cisco to further reduce the cost of LD by building it into their network
switches. When considered in
the context of a large web farm, WLBS has a serious economic disadvantage
that can only be justified by the value of its administrative and
monitoring tools. There is considerable competition in the IP load
balancing market, which drives costs down; the numbers quoted above
are based on the price we paid in mid-1999, around $17,000 per unit.
An existing system that has load balancing in place will presumably
have adequate tools, so the added value of WLBS, in terms of operational
flexibility and superior monitoring, must be considerable if it is
to be economically justified. OS installation
and configuration
Each of several thousand
systems must be converted to the new operating system and application
suite, and this process must be carried out while the service is operating,
and within a short timespan. Required are a mechanism for packaging
the image and a method for delivering it. Among the special requirements:
n
Each server already has a name and static IP address; to fit in with
existing operating practices and configurations, they should retain
the same name and IP address. Using a static address, compared with
DHCP, makes system administration simpler and more transparent. A
machine’s name relates to its physical position within a cluster.
n
It should be possible to convert a machine without physical access.
n
It should be possible to revert systems quickly to FreeBSD in case
of serious problems with the Windows conversion.
n
Downtime for reboots and service restarts should be minimized. Several technologies
were investigated and rejected. In most cases, there were blocking
issues that were seemingly small, but without guarantee of resolution
the team had to adopt a method that they could control. Some of the
issues were:
n
RIS can be used for automatically installing an image from a server
when a machine is initially booted. Drawbacks include: physical access
is required to the machine (to force a network boot), and the system
requires that an IP address be supplied with DHCP (DHCP is not used
at Hotmail, because of the requirement for static IP addresses). It
was impossible to control the name of the new server as required.
In addition RIS was not supported for installing Server, although
it was known to work.
n
AppCenter is intended for this kind of application. However, the initial
release of AppCenter is targeted for small installations. It also
lacks some features needed by application installation and update.
n
Unattended setup performs a standard installation across the network;
because of all the file copying and calculation involved, it is too
slow. The team opted to
extend an existing technology, “kickstart”. This uses the OS existing
on the machine to bootstrap an image, prepared using sysprep, and
then run scripts to perform the remaining configuration tasks that
need to be carried out after the install. The image copy is sufficiently
fast, and the post-install steps are minimal. IIS configuration
It proves to be difficult
to configure IIS in a precisely controlled way. The metabase is obscure
and poorly documented, and produced too many surprises. Furthermore,
a system created using sysprep does not produce a ready-to-run metabase. Consequently, it was
necessary to construct the metabase by using scripts. The scripts
were a mixture of command files that repeatedly call the mdutil
utility, and some special-purpose pieces of scripting code (VBScript
in this case, although any language that supports COM would work).
The scripts are run as part of the mini-setup step that follows construction
of the operating system on the target computer. Figuring out the metabase
structure, which elements needed to be set, and how to suppress the
unwanted elements (for example, the trees defining the default and
administration site) was the most complex and error-prone part of
the entire setup design. Considerable reverse engineering was necessary.
Major improvement is needed in the way the metabase is described to
users, and the way that administrators can script the commonest tasks. Tuning and
hardening the system
The task was to tune
the system for the best combination of throughput and performance,
and also to harden it against attack from outside. This required attention
in several areas:
n
System configuration, in removing all unnecessary system services
and making sure the remaining services are configured as effectively
as possible.
n
Registry settings for performance and security.
n
Metabase settings for performance and security. The team was unable
to find a comprehensive set of published settings that covered the
above areas, perhaps because there are so many sets of demands on
system configuration in general. However, we feel that configuring
a system to be a locked down web server will be a common enough task
that it would be useful to establish and publish a set of recommended
actions and settings. Active Directory (AD)
is a key addition in Windows 2000, yet it has been difficult to justify
its use in the web server farm context. Users in AD
AD is generally used
to manage populations of users and machines. At Hotmail, it is not
interesting to use AD to manage customers. User privileges and restrictions
are already handled by the Hotmail application code, and there is
no concept of granting or restricting access to customers within the
Hotmail infrastructure. Furthermore, there is a constantly changing
population of many usernames (over 100 million in July, 2000), a size
that may be beyond the capabilities of Windows 2000. The site has users
in another sense: administrator accounts that are used to manage the
machines by hand or by script. However, all administrators are fully
trusted in the system (once they are inside the firewall), and it
is normal to allow them to log in with full administrative privileges.
This is the equivalent to the UNIX root account. It is useful
to allow single sign-in, to allow an administrator to move from one
machine to the next, and also to add new users at a central point;
however, these needs are easily met by NT4’s NTLM. Computer systems
in AD
There is a stronger
argument for entering the servers in AD. This will provide integration
with DNS, and holds out the potential for administrators to classify
machines in whatever ways they find useful operationally. The Hotmail server
farm is organized as a series of clusters, each containing several
hundred servers. These machines must be named systematically. In practice,
server names are duplicated between clusters, as they are identified
uniquely by the fully qualified domain name (each cluster is a subdomain).
This presents a problem for AD, which (apparently because of NetBIOS
compatibility) does not permit duplicate short names anywhere within
a set of subdomains. Getting rid of the NetBIOS legacy will be a great
boon for Microsoft. This apparently trivial
restriction was enough to postpone the idea of constructing an AD,
which in any case is additional work without obvious benefit. It was
necessary to maintain the names of systems through the upgrade, because
of legacy monitoring and administrative tools. Existing administrative
mechanisms were adapted and did not need the benefits of AD. It is
expected that, later, administrative staff will be able to develop
tools that can make use of AD (for example, the ability to query on
servers with a particular characteristic may be useful) but for now
there is no need to break into the circle. The Windows DNS service,
operating without AD, proved perfectly capable of handling the load,
and was able to take up the data from a UNIX BIND server easily. Windows
DNS is used at the site for both internal and external name resolution. Application
update styles
It is naturally a
requirement that a web-based service operate continually, without
customer-visible degradations of service. This is not just a matter
of pride; even a loss of availability for a few minutes every month
can produce too much degradation in the perceptions and (assuming
we publish uptime numbers) the availability measurement. It’s a solution, but
a weak one, to put servers behind load-balancing equipment and take
them out of service when required for upgrade or other maintenance.
The challenge is to keep each server running continuously as much
as possible. Except for operating system upgrades, a system based
on FreeBSD and Apache can keep operating while the application is
upgraded, and Windows should be able to do the same. Application updates
at Hotmail are of two kinds: content and code. Content updates change
only data files, generally those that directly determine what the
customer sees on the screen, and they are carried out on their own
schedule. Apache can handle both content and code updates without
stopping the service. Updates can be rolled out directly, when the
data is updated in place. They can also be timed, when the updates
are put on the servers in a staging location together with an update
batch job that will be triggered at the desired moment. The timed
update is used when it is important for the application’s integrity
that the entire site be updated simultaneously, something that is
impossible to achieve when updating several thousand servers across
a single network. Application
update techniques
Apache running under
UNIX supports both kinds of updates very simply. A CGI application
can be replaced, even while the old file is being executed, and the
next execution will use the new file. The same is true of content.
If Apache’s own configuration files must be updated, there is a procedure
to signal the server to reset itself and reread its configuration,
and that takes around a second. Unfortunately, IIS
5.0 does not support either kind of update well. When IIS accesses
content directly, it locks the folders. Fortunately, this doesn’t
apply to most of the Hotmail upgrades. The bigger issue is updating
the ISAPI filters, which must be done while the IIS server is stopped.
The entire process can take a minute or so. The Hotmail staff
has invented a technique that uses a thin ISAPI filter (the “shim”).
It loads the application as a separate DLL and passes on all the ISAPI
requests. It also watches for updates to the application DLL in a
predetermined place, and when it is notified of an update it maps
the new DLL, sends it all new requests, and allows the old requests
to terminate before removing the old DLL. This technique has been
made available to the IIS team. Intellimirror
The team investigated,
but decided not to use, Intellimirror-based update. First, Intellimorror
requires AD to be implemented. Second, Intellimirror (working with
the Installer) only makes updates to applications when a user logs
in or when the system is rebooted. Since user login is an irrelevant
activity in this context, and the whole idea is to prevent a reboot,
Intellimirror-based update does not meet the need. Distribution
mechanism and format
The UNIX implementation
packaged new code as a compressed file using the UNIX tar format,
and distributed it (and the necessary installation code) using the
UNIX rdist utility. The team investigated
use of MS Installer technology for a packaging format. Although it
would probably have met the requirements (including the ability to
unpack versioned files into specific locations, make registry changes,
and run arbitrary code during installation) it proved too difficult
to learn, despite the availability of a few decent authoring packages.
The team stayed with the zipfile method of packaging. The UNIX rdist
mechanism is also well suited to installation and updates on a large
number of identical machines. From a central location, the administrator
can iterate over a list of servers and push packages to them. The
rdist daemon (service) running on the remote systems will extract
files from the packages into their specified locations and run arbitrary
commands before and after installation. This is approximately equivalent
to MS Installer features, with the additional ability to push distributions
over a list of machines. The Hotmail team implemented a version of
the rdist daemon to run on Windows. Network Operations
Center
The Hotmail infrastructure
is monitored remotely, in an operations center located with the development
staff in the Sunnyvale campus. There are many tools in place to monitor
the performance of the server farm. Some of these measure the systems
by their external behavior, and they did not need modification. Others
use information gathered by the servers themselves (performance counters,
disk statistics and so on). It proved to be relatively simple to write
scripts that would extract the desired information from the Windows
performance counters and send them to the Operations consoles. Autonomous
monitoring
Some of the self-test
and monitoring features of the servers are performed by customized
operations (usually scripts) executed at predetermined intervals.
These intervals are anything between a minute and a week. Using FreeBSD, such
tasks are scheduled by the cron service. Jobs are scheduled
by being listed in a file, one line per job. Changing the file is
easy to accomplish using the command line (or rdist), and replacing
the entire file is a good way to ensure that each server has exactly
the schedule of jobs that the administrator intended. Jobs can be
scheduled to execute once, or at intervals down to one minute. Although the Windows
Task Scheduler service is fundamentally able to look after such jobs,
the interfaces provided in Windows does not measure up to the task.
n
The usual interface is the GUI, which is appropriate for setting up
jobs on a machine at a time, is labor-intensive and error-prone.
n
The command at is deprecated, is not able to schedule repeated
jobs at a frequency of less than one day.
n
The command jt was offered by the Task Scheduler team, but
it is unsupported and awkward to use (it was intended for testing).
n
None of the three interfaces offers an easy way to replace the current
task schedule entirely. The team met the need
by running the cron service provided in Services for UNIX.
As described earlier, relying on Services for UNIX (or any other package
subject to extra license costs) provides a bad model for other customer
deployments. We have provided input to the Whistler command line team
for an improved interface to Task Scheduler. Logging
There was a minor
issue concerning the UNIX integrated logging feature (syslog).
The kernel, standard services, and application code can write lines
of text to syslog, and a single configuration file is used
to determine the destination of the text lines. Thus an important
alert can result in a console message and email, while an informational
message can be written to a log file. The administrator can change
the destinations without code having to be recompiled. An application like
Hotmail often uses the application access to syslog to write
statistical data of business interest (such as creation of a new account
or sending of an email message). Administrators can use other tools
to analyze the logs, archive them, or simply count occurrences and
throw the logs away. Typical usage is at the order of one event per
second; the high performance associated with the kernel log is not
required. There are no features
in Windows 2000 that provide the same combination of convenience and
configurability, although the kernel event log comes close. For convenience,
and also to avoid recoding, the team elected to use the syslog
feature from the Interix subsystem, introducing the issues about
notional cost that have already been discussed. Whistler introduces
the Enterprise Event Log, a lightweight WMI feature, which seems to
provide the desired functionality. A closer examination of the kernel
logging may show that it too can meet the need, Any replacement should
involve trivial change to the existing application code (perhaps even
using a macro); it would be desirable not to have to recode calls
to syslog in order to keep down the amount of source code conversion. There are occasions
when, after deployment, the administrators need to make a configuration
change consistently across the entire farm. The rdist mechanism
can be used for configuration changes; if the change is simple then
rsh can be used. The key fact about UNIX that makes this work
is, again, that all system administration tasks can be done from the
command line. Windows should provide
the same functionality, given some means of aggregating a group of
servers and some way of performing an operation consistently across
all the servers. Single commands, pipelines, or scripts (command scripts
or COM-based scripts) would be appropriate actors; however, scripts
need to be downloaded, executed (and, if necessary, cleaned up). There
should be the ability to defer the activity until a specific time,
presumably using the improved Task Scheduler. In other words, Windows
must support old-fashioned batch processing. One specific example
of a feature that is not accessible to the batch model is Network
Interface Card customization; for example, there have been requirements
to change the card’s speed from 10 Mbps to 100Mbps (at a specific
time) or to change the MTU setting. The configuration model of an
Ethernet NIC varies between manufacturers, and the standard GUI is
driven by a schema that is found in the registry. Such a GUI is not
at all adaptable to the batch model. It is possible to make the required
changes to the registry, but that would require a subsequent reboot,
which is not acceptable. A brief period off the network, while the
card resets itself, is the most downtime that can be accepted. The Hotmail team,
with help from a network engineer, developed a rudimentary application
that would put a specific value in the registry and (using an undocumented
interface) reset the card in a way that will make it pick up the new
value. We strongly urge that the feature be put into the shipping
system. Helping UNIX system
administrators with the transition to Windows is an experience in
itself, and much was learned. Again, this is data from a single corporate
experience, but we suspect it is fairly typical. Here, then, is the
human engineering overview. Initially, the plan
to convert from FreeBSD to Windows was met with responses ranging
from skepticism to hostility, in a way that should be familiar to
those who share the attitudes of the various UNIX communities to Microsoft
software. We engaged with the
operations staff by asking them to define what their everyday tasks
are, in all areas of operating system and application maintenance.
Instead of a set of tasks, we were handed a set of the UNIX commands
and features that were used to carry out those tasks. While this did
not directly meet the need, it gave us an opportunity to address all
of the features directly, and show that Windows has an exact equivalent
in the core system, or in the Resource Kit, or easily provided with
a script. There were very few cases where no satisfactory alternative
could be found. Essentially, this was throwaway work, as the eventual
solution solved the problems in a more Windows-like way, but it was
an excellent opportunity to gain the confidence of the operations
staff. It was clear from
the responses that some people from the UNIX side of the house cannot
distinguish our different systems that are marketed under the Windows
brand; there was an inbuilt assumption that Windows 2000 shares the
features and faults of Windows 95. Those who were somewhat familiar
with Windows NT were not aware of the range of the non-GUI offerings
(to be fair, neither were we); the set of commands in the product
and the Resource Kit is fairly broad although, as we have seen, there
are gaps and they lack stylistic consistency. Other staff members,
not members of the regular operations team, carried out the conversion.
When deployment came near, the Operations staff had to learn the new
tools and paradigms. Their existence proved enough; the main interest
of Operations staff is, after all, to run and administer the system,
and once they found that there were tools, whether custom-built or
standard, that did the job well enough, they were able to take control
and gain a sense of ownership. Some standard one-day courses were
also given to the staff, to prepare them for handling system debugging,
hotfix application and so on. By this time, the staff had become convinced
that Windows is, after all, a real operating system with surprising
richness. To summarize:
n
Make the message clear: Windows 2000 is a modern operating system;
it’s not Windows 9x.
n
Gain the confidence of the skeptics by showing them that it is a real
operating system, and not so different from other operating systems
in fundamental ways, by showing some basic command-line tools that
monitor the system in action.
n
Use the self-interest of operations staff to ensure that they have
full authority over their areas of responsibility. These are the main
lessons that we can extract from the Hotmail conversion.
1)
We need a consistent, comprehensive, thoughtful approach to integrated
management of a set of servers. This does not necessarily mean that
we should slavishly follow the UNIX model of iterating through a list
of machines with an rsh command, or pushing configuration files
to a list of machines. The fundamental goal is to be able to manage
machines as an aggregate; doing this through a GUI is not necessarily
evil, so long as it can be done remotely, and once. The point applies
to application distribution as well as to system tuning.
2)
NLBS is at an economic disadvantage, due to its association with Advanced
Server, and Hotmail operations staff were sufficiently satisfied with
the existing solution that they did not feel the need to investigate
NLBS’s operational advantages.
3)
The metabase needs to be ripped out and replaced with something that
is much easier for an administrator to see and understand, and be
confident that there are no hidden surprises. The IIS6 planners have
heard this opinion.
4)
It should be easier to tune and lock down a single system, and have
the changes propagated to all systems in a given class.
5)
Windows is too complex to understand at first, particularly during
a conversion from UNIX. There are just too many things about it for
a planner in a startup to understand. Typically there is little time
to attend training. The problem is most Computer Science graduates
come to their startups already understanding enough about UNIX to
be confident that they can use it effectively. We do need to be careful
to balance the complexity and transparency carefully. 6) The basic need for an Internet site, converting from UNIX to Windows, is to be able to quickly replace their application and operational methodology with something at least equally good. Improvements that come for free are good, but implementing new technologies and programming methods will need to take a back seat so long as they delay the main purpose, which is to keep a site online and competitive. Anything else is a cost that needs to bring a clear benefit. [1] Use of this term can be something of a conceit; here we mean that there are economic pressures to roll out new versions of the application on a rapid cycle, typically 8 weeks. This means the team is constantly in “ship mode”. In addition, new systems are built out barely ahead of the demand. [2] Whistler will enable a Terminal Server user to log on to the console, but as we see later Terminal Server is not an ideal solution. [3] For example, there was a need to reduce the MTU parameter of the TCP/IP interface. There was no command available to make the change, but the code in the network stack was easy to find, modify (one line) and rebuild. [4] One notable exception: the Windows library call to perform case-independent string matching was found to be unexpectedly inefficient, presumably because of the internationalization concerns that are not present on the simpler UNIX systems.
|
securityoffice.net
is not responsible for the misuse or illegal use of any of the information
and/or the file listed on this site.
Any question please contact: [email protected] |